Flameproof through-wall terminal

Flameproof through-wall terminal

Range of suitable alkane use

Suitable for use in Class I and Class II environments.

Parameter Description of through-wall terminals

(1) Voltage level :≤ 220V(except fiber):

(2) Number of cores: if the above table can be made up of the number of cores, can also be customized according to customer requirements;

(3) Communication media, cable, optical fiber, network cable and coaxial line optional (can be provided by the customer line

Customized):

(4) flameproof surface installation method

Circular flameproof surface installation mode: medium 36: medium 42: medium 46: medium 48 Optional (according to customer requirements

To order):

Installation mode of threaded flameproof surface :M36x15M38x15M2x15M8x15 Optional

Can be customized according to customer requirements);

(5) Wire specifications: the length of the front and back end of the wire and the specifications of the wire are determined by the customer when ordering.

(6) Line number The two marks of each wire are the same line number, which is convenient for customers to distinguish.

Through wall terminal order need to know

As the filling terminal is customized according to customer requirements, the following parameters should be provided for ordering

(1) Installation of copper sleeve on flameproof surface;

(2) Number of cores;

(3) The conductor color;

(4) Wire specifications (square number):

(5) How long is the upper end (flange side) reserved:

(6) How long the lower end (screw side) should be reserved:

(7) The optical fiber must provide single-mode or multi-mode type, and the plug type on both sides (such as :SC, LC, ST, etc.):