Air anion detector XDB-6800
Product Introduction:
Air ion detector XDB-6800 is a small ion detector, the equipment is beautiful and elegant, using 2.8 inches full color HD LCD display, curve display and list display, automatic calculation of various values and average, automatic zero working mode, accurate measurement data. The sensor adopts high-precision AD and amplifier, which can measure the 10-15 power current signal. The equipment provides zero shielding cover, which can be tested at any time to detect the accuracy of the equipment, with good consistency and high reliability. It can observe the changes of air ions and PM2.5, etc., and is a cheap and beautiful scientific instrument.
Product features:
1, single silent collector, low noise.
2, soft switch design, beautiful and generous.
3, the equipment is small, easy to carry.
4, 2.8 inch full color HD LCD display.
5, high measurement accuracy, with shielding cover, can be measured at any time zero value.
6, long working time, no temperature difference drift, good data stability.
7. PM2.5, PM10 and other elements can be measured simultaneously
8, automatic measurement of a set of measurement data per minute, instantaneous measurement of 1 second measurement of a set of data.
9, automatically calculate various ion values and mean values.
10, automatic measurement curve display, visual display of historical measurement curve and temperature and humidity curve.
11, U disk Copy measurement data, easy to use
12, with RS232 interface, can be connected to computer software.
13, the standard high-precision temperature and humidity sensor can continuously observe the relationship between negative ions and temperature and humidity measurement.
14, equipped with high current charger, charging time is fast, 4 hours can be filled
15. Optional dehumidification device can be developed to work in high humidity environment for a long time. The standard can work for short periods in high humidity.
产品参数:
设备类型 | 手持式小型负离子检测仪 |
检测要素 | 空气小粒径负离子(迁移率>=0.4) |
测量精度 | 1个/CM3 |
测量误差 | 标准无干扰环境中1%,±5%(XDB-6800A)±3%(XDB-6800C) |
测量量程 | 1~3*108个/CM3自动切换,可制定10~3*109个/CM3自动切换 |
传输方式 | RS232,USB |
供电接口 | 12.6V锂电池充电接口 |
数据存储 | 设备具有16M 数据Flash,可循环存储3个月以上数据,断电情况下能保存10年以上。 |
温湿度测量 | 测量精度达0.1度温度,1%RH湿度 |
自动测量 | 设备采用无人值守技术,无需人工干预自动测量 |
高湿工作 | 设备采用先进除湿技术,可在高湿环境下工作 |
检测技术 | 设备采用电容式离子室收集技术。 |
放大技术 | 设备采用低噪声放大器,配合16位高精度高速AD,是普通设备精度的16倍 |
防风技术 | 设备离子收集室空气通道采用90度直角通道,能有效的防止风干扰。 |
测量频率 | 设备测量间隔可根据客户制定,1分钟一组测量数据。 |
设备电池 | 设备内部集成大容量锂电池,充满电能工作5~8小时。 |
设备电源 | 12.6V锂电池充电器。 |
设备功率 | 设备功率小于2W,相当于一个小型LED灯。 |
工作环境 | 温度:-50度~70度,湿度:0~99%RH。 |